- Feb 2018AEGIR-Marine is available 24/7
On Sunday morning we received an urgent call from a Superintendent who just left the shipyard after dry-dock, but ran into serious problems on their Propulsion systems. With only a maximum pitch of 35% on her pitch propeller the vessel could not continue her journey, which would cause possible delays in her charter. After a call with our 24/7 duty officer a control specialist was consulted and found that the problem could not be solved by the crew. Within 1.5 hour from the initial call from the superintendent, our control specialist was on board at the Maasvlakte terminals, where a root cause analysis has been conducted. Within 2 hours the problem was found and solved. After a sea trial with positive result, the vessel and its crew finally headed out for sea!
- Jan 20185 maritime trends for 2018: the promise of service
Although the economy in general is booming, unfortunately growth in many segments of the shipping industry is still lagging behind. Yet there are some small rays of hope, and it’s about time. Another side effect of the economic crisis is that it has triggered a 'race to the bottom'. Many companies are approaching their nadir, hit rock bottom or were swallowed by the ground. A dead end race as far as I am concerned. Merging and downsizing, larger vessels and containerization have made companies more efficient. And with Big Data, automation and eventually even unmanned vessels, there are still many benefits to be gained. But our industry seems to have lost a lot of its elasticity. Many efficiency successes were at the expense of personnel, customer orientation and as a result customer satisfaction. Especially on this aspect companies can make a difference in the short and longer term. Therefore I would like to emphasize five prerequisites for a future-proof, service-oriented organization. Read more.
- Jan 2018AEGIR-Marine’s new propulsion workshop DNV-GL approved
AEGIR-Marine has received an Approved Workshop statement from DNV-GL. AEGIR-Marine is the first brand-independent service provider in The Netherlands with an approved workshop for repair and maintenance of propulsion systems.For brand-independent service providers who perform repair and maintenance work on maritime propulsion systems, approval of their workshop is completely new. AEGIR-Marine approached DNV-GL for the approval process, because this agency also supported the company in obtaining the ISO 9001 certification, the international standard for quality management systems. Workshop Approval includes the quality of maintenance on propulsion systems, workplace routing, a safe working environment, dealing with hazardous substances and risk management to ensure the quality and a high uptime of the equipment based on elements of ISO 9001, 14001 and 18001. Read more.
- Nov 2017Bengi and AEGIR-Marine announce strategic partnership
Bengi BV (Marine Engine Service & Trading) and AEGIR-Marine (expert in the field of stern tube seals and services for maritime propulsion systems) announced a mutual strategic partnership. This allows the joint customer base of both maritime service companies to profit from their combined knowledge on propulsion systems and engines. Read the English or the Dutch press release.
- Oct 2017AEGIR-Marine and Maersk Line renew Frame AgreementWijk bij Duurstede, October 26 2017 – Maersk Line, global leader in container shipping, renewed its Frame Agreement with AEGIR-Marine, full service provider for stern tube seals and propulsion systems for the maritime industry.The Dutch company will extend its high quality overhaul and maintenance services for Maersk container ships for the coming years. Maersk Line manages the contracted vessels from its offices in Copenhagen (Denmark), Norfolk (USA), Singapore and Mumbai (India).
Three years ago both companies signed their first mutual frame agreement. The years following were used by Maersk Line and AEGIR-Marine to align their operations. Maersk Line was looking for service cost reduction on its container ships, as the profitability of this market is under pressure. Read more.
- Sep 2017AEGIR-Marine opened its new Propulsion Workshop, R&D Center and AEGIR Academy
AEGIR-Marine opened its new Propulsion Workshop, R&D Center and AEGIR Academy. As a opening event the stern tube seal and propulsion service expert held a seminar entitled 'Exploring The Future Of Services'. The two day event was attended by some 400 customers and business relations. Astronaut André Kuipers, Tjapko Poppens, Mayor of Wijk bij Duurstede, and the owners of AEGIR-Marine, Ruud Muis and Hans Dekker, jointly commissioned the opening ceremony. During the event DNV GL officially issued the Workshop Approval Certification for the new Propulsion Workshop and AEGIR Marine launched its new proprietary, brand independent and hyper robust seal. Read more.
- Apr 2017AEGIR-Marine April Newsletter
- Apr 2017AEGIR-Marine in the land of the rising sun
AEGIR-Marine will attend the BARI-SHIP2017 fair in Imabari, Japan from 25 May - 27 May 2017. Imabari is situated on the smallest of the four Japanese islands, just South of Honshu. The city is the very center of Japan’s maritime industry. One-third of the annual commercial Japanese tonnage is built here. Imabari also hosts an extensive marine equipment manufacturing industry. Read more.
- Apr 2017On the Job: Peter Versteeg
Peter Versteeg is an experienced stern seal engineer, and one of our engineers who is specialized in installing Primair Systems. He told us about a service job he was proud of, which he worked on together with Danny Haverlag. Read more.
- Apr 2017AEGIR-Marine adds stabilizer repair to its service package
AEGIR-Marine adds stabilizer repair services to its portfolio of independent maritime services. In February 2017 we reinforced our team with a specialist in stabilizers. The expansion of our service portfolio is part of our long term growth strategy. Now we are able to offer ship owners and ship managers a one-stop-shop overhaul service. Read more.
- Jan 2017Bigger and Better
- Jan 2017AEGIR-Marine’s new repair shop: bigger, better
AEGIR-Marine considerably expands its in-house repair capacity for ship components, such as thrusters and propulsion systems. The company is currently building a new accommodation in Wijk bij Duurstede, the Netherlands. The new building, adjacent to the existing one, will house a new state of the art work and fully equipped repair shop. In this way, AEGIR-Marine will be able to deal with the growing demand for repair services in the maritime industry. The opening is due on 1 July 2017. Read more
- Jan 2017Five questions for Mustafa Göktas
How long have you been working for AEGIR-Marine?
“I’ve been working for AEGIR-Marine for two years now as a propulsion engineer."
What was your last engineering job?
“I just returned from an extensive job propulsion job in Shanghai, China. I spent two weeks there on a big shipyard. The vessel was a fifteen year old bulk carrier, which needed a complete overhaul of the oil distribution box (OD), the controllable-pitch propeller (CPP), the stern seals and shaft installment." Read more
- Jan 2017The PRIME-Blue
The PRIME-Blue is AEGIR-Marine’s water lubricated stern seal installation, which is designed to be an environmental friendly sealing solution. Read more
- Jan 2017The new AEGIR Calendar 2017!
The new AEGIR Calendar is out now! Read more
- Dec 2016Maritime trends for 2017 and beyond
Ruud Muis, Marine Service Entrepreneur and Co-founder of AEGIR-Marine BV, on the maritime trends for 2017 and beyond. His vision on the maritime industry, the economic challenges, the after sales market and innovation. Read more
- Dec 2016On the job
On the job
AEGIR-Marine was asked to service a cruise vessel which was planned to dock in Cadiz, Spain. The job included the overhaul of three thrusters (2 in the bow and 1 in the stern) and the exchange of the seal rings of the aft and forward stern tubes on both propeller shafts, A nice job of course, on a very well maintained vessel.. Read more
- Nov 2016Five questions for Anton Pramatarov
What is your position at AEGIR-Marine?
I am an Area Sales Manager for AEGIR-Marine. My roots are in Bulgaria, and I’m responsible for Russia, the Baltic states and Eastern Europe, with the exception of Poland. I am also ASM for Greece, Cyprus, Iran and the Middle East. Read more
- Nov 2016Propeller damage repair: the AEGIR-Marine approach
AEGIR-Marine was commissioned with the repair of propeller damage of a Greek Panamax bulk carrier in Guangzhou, China. The service engineers of AEGIR-Marine were dealing with many challenges in the course of this project, and had to improvise on the spot.
On the morning of 10 June 2016, received a diving inspection report from a consultant on the propeller of the vessel in Guangzhou. During a laden voyage from Iran to China the vessel encountered excessive vibration on her propeller. The ship owner arranged for an underwater propeller inspection. Read more
- Nov 2016Five questions for service engineer
How long have you been working for AEGIR-Marine?
I’ve been working here for 3,5 years now.
What is the project you are currently working on?
I’ve been to Malta to install a PRIMAIR seal system on a vessel that is just five years old. A few years ago, the revised Vessel General Permit (VGP) issued by the US Environmental Protection Agency (EPA) have come into force. Forcing all ships in US waters to apply biodegradable oil (EAL) for their propulsion system. Not every propeller shaft seal is EAL resistant, so we convert them into a PRIMAIR system. Read more
- Nov 2016Special job: Underwater
AEGIR-Marine received a call from Underwater Propulsion Engineers (UPE), our underwater diving partner. UPE came up with an emergency job on which they needed our assistance. A loaded car carrier in Panama was losing oil through the stern tube. Because the vessel was loaded, it could not be docked. Also trimming, removing or shifting the cargo weight of the ship, was impossible. As the leakage was sustainable, underwater repair was the best solution.
- Nov 2016AEGIR's Calendar: November
Our November calendar shows the dark months ahead of us. But come snow, hail or storm, we will delver our parts. It's our state of mind. That's why we keep all PRIME parts in stock and delver on the spot if necessary.
- Oct 2016AEGIR’s successful quest at the SMM exhibition
AEGIR-Marine is the illustrious regular guest at the SMM exhibition in Hamburg, Germany. Needless to say that the 27th edition of this exhibition again hosted our stand, from 4 to 7 September 2016. The leading international maritime trade fair in Hamburg welcomes more than 2,200 exhibitors from all over the world, roughly 50,000 industry visitors, and covers some 93,000 square meters of exhibition space. We had a great time. Hard work and sometimes play. Read more
- Oct 2016Powered by green energy
AEGIR-Marine is way ahead when it comes to sustainability. And, we are working hard to reduce our ecological footprint even more. Our existing office is very sustainable, our new office will be even more sustainable.
AEGIR is a fast growing company. Since we started in 2000, our company has grown to 70 employees in the Netherlands, and 104 worldwide. That’s why we are building an additional, even more sustainable office next to our current office in Wijk bij Duurstede, the Netherlands. And it is taking shape at a tremendous pace. Read more
- Oct 2016Five questions for service engineer Richard Banning
Five questions for service engineer Richard Banning
How long have you been working for AEGIR-Marine?
I’m in this profession for some forty years now. First in the United Kingdom, where I was born. The past ten years I worked as a propulsion service engineer, and since 2013 for AEGIR-Marine. Read more
- Oct 2016Iranimex 2016: opening new markets
AEGIR-Marine will present itself for the second time at the Iran International Maritime Industries Exhibition (IRANIMEX). The exhibition will take place from 18 to 21 October 2016 on the Iranian island Kish. This is the only professional maritime exhibition in Iran. AEGIR-Marine combined forces with Europort in the Netherlands Maritime Technology pavilion. The Holland Pavilion covers an area of some 240 square meters.
- Sep 2016Read our latest Newsletter
- Aug 2016Thruster job -continues
Palermo - Italy
While we are working on the huge thruster in the Netherlands (see earlier post), the pipe-laying vessel it belongs to, docked in Palermo-Italy. As we mentioned before the spare thruster at the workshop in Wijk bij Duurstede is just one of 11 thrusters that belong to this vessel. The one in the workshop is the spare one.
By now the other ten thrusters have been removed in Sicily for overhaul and inspection, but that wasn't quite as simple as it sounds.